The Effects Of Animal Testing On Human Society - 1591 Words

The use of animal testing has been going on for a long time. Although there have been many cases where people try to stop it or try to convince people that it is wrong in today’s society it is still happening all over the world. This research paper will talk about how in today’s society is racing to discover cures for diseases. How humans have made advancements in the world we have also established the scientific evolution. By doing so our ethics and morals have failed to progress. The knowledge that we gain throughout the years is remarkable but it is our responsibility to use it wisely and ethically. We heartlessly torture and kill animals that we consider lesser beings. For something as simple as eye makeup hundreds of animals are tortured and blinded by test that are being done to them in laboratories where they are hardly being fed, often forced to live in filth, sometimes they even remove their vocal cords to keep them quiet. We pour cosmetic products into their e ye and body parts to determine if it will have a harmful effect on humans. Animal’s posses the same emotions and feelings as humans and without any care they are subjected to pain. Mankind fails to give animals respect they deserve, they are treated with lifeless. Something that needs to be changed. Animal testing has been going on for centuries and it will probably continue that way if we don’t share the truth. Humans do not think that animals are on the same level as them so they treat them horriblyShow MoreRelatedAnimal Testing Should Not Be Banned1581 Words   |  7 PagesAnimal testing is being used by different organizations all over the world to prevent specific diseases, especially cancer. Americans see animal testing having a harmful effect but it is one of the main reasons why society has most cures for some illnesses. This topic is important because people need to know what goes on during animal testing and why it is very beneficial. Animal testing needs to be used to find all cures. Some animals such as chimps/ monkeys have 90% of the same DNA humans haveRead MoreAnimal Testing Essay1194 Words   |  5 PagesUsing helpless animals for the benefit of human beings goes back thousands of years. A common theme has been present: the use of these animals has been necessary for survival. Of late, these essential sacrifices have metamorphosed into yield-less speculations. Animal testing is wrong based on these premises: there are available alternatives to direct testing on live animals, the results acquired rom the tests are inaccurate and repetitive, and ultimately it is speciesism, which is comparable to racismRead MoreAnimal Testing Should Not Be Banned1578 Words   |  7 PagesEngland Anti-Vivisection Society on their research from Harm and Suffering, â€Å"[e]very year in the U.S., over 25 million animals are used in biomedical experimentation, product and cosmetic testing, and science education.† Animal testing has been traced back to Aristotle and Erasistratus who according to Rachel Hajar from Animal Testing and Medicine, â€Å"[were] [e]arly Greek physician-scientists† that have conducted animal experiments. Another physician who has performed animal experimentations, GalenRead MoreAnimal Testing Speech Outline965 Words   |  4 PagesAnimal Testing Introduction Attention-getter: Visualize yourself somewhere locked and isolated, whether it is a closet, a cage, or a box. Now visualize yourself being constantly controlled, not being able to choose when to eat, when to drink, or even when to sleep. Thesis: Animal testing is a heavy topic that usually goes unnoticed. To many scientists, animal testing is beneficial and to society it is morally wrong. Credibility: After doing our extensive research, we are knowledgeable about animalRead MoreHuman Testing On Human Beings1727 Words   |  7 Pageschemicals effect humans and animals? The answer is, we must perform test on something that is similar to the human species. Animals having similar traits and features in the body have often been the experimentation method of choice. By using animals in testing has raised a lot of concern and controversy over the years, but so has testing on human beings. One of the most horrifying examples of human testing was during World War II, the Nazi party in its quest to create the ultimate human species,Read MoreAnimal Testing: The Future of Pharmaceuticals Essay1237 Words   |  5 Pagespoisons, through animal testing, they have been donned to be unsafe for people and environment. Without animal testing, the general public would still be using these hazardous chemicals. Many humanitarians may be opposed to testing chemicals on animals, but if scientists didn’t test on animals, individuals would have to test the deadly chemicals or live in a world where people don’t know if the chemicals they are using are poisonous and lethal to the human society. Animal testing may be wrong inRead MoreAnimal Experimentation Should Be Banned1426 Words   |  6 Pagesjudged by the way its animals are treated.† - Mahatma Gandhi. These famous words still ring true in today’s society as we struggle to overcome the scientific experimentation on animals. Animals have acted as the archstone of human civilization since the dawn of man, from a source of food, to companionship. However, in the past century, we have been blurring the line between environmental entitlement and environmental rape. Every member of the human race interacts and depends on animals, and we owe themRead MoreThe Morality Of Animal Testing And Its Effect On The Biomedical And Consumer World1698 Words   |  7 PagesThe Morality of Animal Testin g and its Effect on the Biomedical and Consumer World Animal testing has been a controversial problem in today’s society and it affects people from all over the world1 not just animal activists or scientists. Most of the products and medicines used today have been tested on animals. These animals used in experiments have been thought to only benefit society but morally this hurts our society. This hurts our society because now animal testing has become a social normalityRead MoreAnimal Testing Is Cruel And Inhumane1229 Words   |  5 Pagesforms of complications among human beings citing the various changes of conditions from day to day. Scientists are charged with the techniques to finding solutions to the complicated health issues facing humans that have no solution. The risks associated with the pursuit of the solution has made the scientists to be cautious of their actions, an action that led to most of them opting for the use of animals to carry out the tests before implementing the solution for human beings. The idea has alwaysRead MoreAnimal Testing Should Be Made A Better Society For People1551 Words   |  7 PagesAnimal testing has many advantages that have made a better society for people. Animal testing can be defined as, â€Å"the use of non-human animals in research and development projects, esp. for purposes of determining the safety of substances such as foods or drugs† (â€Å"Dictionary 1†). Animal testing is literally how it sounds to others. Animals are being tested on in order to try different products made by scientists in order to better the society. One advantage of animal testing is that animal testing

First Wave Feminist Movemnt - 2207 Words

First Wave Feminist Movement Introduction Feminism is considered a political concept. It is an analysis of why and how women are oppressed. It is a vision of a society where women are liberated and sex role stereotypes are no more. It is also a conviction that oppression of women is a contradiction in society. Women feminists fought for their right to not be property, rights to their inheritance, rights to an education and to a religion that was not patriarchal. Even though feminism had been seen for quite some time, the actual term feminist was not first used until 1912. The modern feminist movement began a as result of sweeping social, political and industrial changes in Europe and the United†¦show more content†¦The women were also not content with men making all of the decisions, in all aspects. Women wanted to be included in positions of decision-making. The beginning of the women movement in America can be marked by the Seneca Falls Convention in July 1848 (DeFonza). Abolition and Suffrage Aligns Although the alignment was difficult at first, black and white women formed bonds in the 20th century. They had a common goal of equality for all women. Women of color continued to participate and representatives such as Ida B. Wells and Mary Church Terrell also strove to show how the linkage of sexism and racism functioned as the main means of white male dominance (Krolokke, 4). The first wave of feminism grew out of the major reform movement, abolitionism (DuBois). The women working in abolition found that they were not allowed to fully and equally participate in the decision making processes of the movement. In 1869, the Suffrage movement split into two factions. One was the National Woman Suffrage Association, which was more radical and would not compromise on the issue of black mens suffrage; meaning that both men and women should be granted suffrage at the same time. It was seen that the best way to get the vote would be through a constitu tional amendment. The other was the American Woman

The Mechanical Disaster

Question: Discuss about the Mechanical Disaster. Answer: Introduction: Essay A RMS Titanic existed as a British travellerliner, which lapsed in the North Atlantic Ocean during the initial morning on 15 April 1912, as soon as crashing with an iceberg throughout the maiden voyage starting from Southampton to New York City. Over 1500, travellers died in the lapsing out of the total 2,224 travellers as well as the crew on board, which made it the mercantile peacetime maritime tragedy in the recent account. The biggest ship afloat by the period it came into the facility, the RMS Titanic stayed as a second of all the Olympic Class Sea liners managed using the White Star Line, as well as was constructed by the shipyard Wolf and Harland in the field of Belfast. Her designer Thomas Andrews also expired in that dejected tragedy. A radiotelegraph transmitter with an elevated power was offered for transferring traveler "marconigrams" as well as for the effective use of the ship. Following that Titanic entitled at Cherbourg before heading west in the direction of New York. On April 14, 1912, concerning 375 miles as well as four days within the passage, the ship crashed into an iceberg during 11:40 pm(Coyles, 2013). The crash initiated the ships plates to collapse inwards next to starboard area and unlocked five out of sixteen impermeable partitions to the ocean; the ship steadily overflowed with water. An unequal number of males were missed aboard due to women and children procedure for piling lifeboats. During 2:20 am the ship ruined apart including well above one thousand persons aboard. Below two hours, following the sinking of Titanic, the Cunard liner, RMS Carpathia reached during the sinking incident, where the ship leads to aboard an approximated 705 people who survived. The tragedy meted with the jolt a ll over the world.When the ship collapsed with an iceberg, the steel of hull as well as the twisted metal rivets were not successful due to the fragile fracture. The reasons for the fragile fracture consist of heavy impact loading, minimal temperatureand large matters of sulphur too. Next to the materialistic failure, an inadequate or indigent design of the impermeable sections in the lower area of the Titanic was a cause of that tragedy. Following the crash with an iceberg, the region of the hull out of these sixteen sections was destroyed. Clinching off the sections was finalized instantly after the destruction was recognized, however as the ship bow has initiated to pitch further from the mass of the moving water in that region of the Titanic, the water started to drop over into the adjoining sections. Though the sections were called impermeable, they were in fact only horizontally permeable, their clippings were unlocked, and the fortifications expanded only some feet over the waterline (Feng, 2013). Moreover, the sections, which were impermeable, were ineffective to deal with the destruction caused due to an iceberg.Various scientists investigating the tragedy have even presumed that the impermeable sections have been a factor for the disaster by holding the water flooded in the ships bow. Essay B More new safety methods could have been involved such as certifying that extra lifeboats were supplied, drills of the lifeboat were appropriately carried out as well as the wireless apparatus on the traveler ships was operated about the clock, and if these were followed the situation of the disaster would have been better. Moreover, if the control on the amount of lifeboats that ship has to transport would have been up to date and satisfactory, the lifeboats would have been crewed correctly, and there would be no collapse(Han, Liu, Gao, 2014). The material used including the hull steel as well as slant iron rivets could have been better with an adequate amount of sulphur, phosphorus and oxygen and sharp amount of manganese as well as the impact weight. There could be a proper twisting of the plastic in the hull steel, boundaries could be sharp, and the impermeable or waterproof sections in the ship could not be constructed to avoid the arriving water from spreading out. If the similar parts were designed in the future, there would be no fragile fracture due to the strong materials, and no collision would occur if it happens there will be adequate time for the neighboring ships to facilitate and help the sufferer one. Frequently, a lack of engineering ethics is discovered to be the most important reason s for a failure in engineering. In today's world, a mechanical engineer is for making public relaxed, happy, at ease, safe as well as rich in their lives. As a future engineer in mechanics, my personal notes to advance this specific design are to make safe materials, some pioneering techniques for ship construction, the strong edges and hull steel so as to avoid the fracture or the breakage, build safe and balanced parts, manage temperature conditions and balance the sulphur content(Ratnayake, 2014). My idea is to make new safety systems and alarms for the public, the strong bottom plate of the hull to avoid piercing, make a system so that the impermeable sections can stay unharmed, as the ship should remain floating with at least two impermeable sections flooded. Moreover, the altitude of the ships bulkheads should be raised, and should me prepared incombustible. Second interior hull should be fitted to make them extra impact resilient. As a mechanical engineer, I think that the lenthy future of effect resilient materials will depend on manufacturing new complexes as well as the make-up at the molecular stage, i.e, the nanomaterials w hich own the properties of excessive strength as well as less size. Moreover, there should be perfect frequency ratio so that the ships could converse with port system and other neighbouring ships so as to transmit information for the protection. From the point of safety, more lifeboats should be supplied and examination should be passed out as well as all the travellers should have the migration process explained. Lifeboats should be completely or partly enclosed to raise defence against the factors, as well as crisis immersion clothes must also be available for the travellers. Essay C In general, embryonic-country engineering construction is branching out and touching into supplementary capital concentrated areas, for instance, metal merchandise, chemicals, machines, and paraphernalia. And weighty industries, conventionally for the most part contaminate, have been mounting proportionate to light industry. The materials that are used in construction are playing a key role in deciding its longevity. The important characteristics employed in deciding the materials to be used on the factors such as density, cost, tensile strength, shear modulus, bulk modulus, Poissons ratio, elastic limit, resilience, ductility, malleability, toughness, strain hardening experiment, shear strength, fracture toughness, and endurance limit. Once the materials pass such tests, it can be successfully used in the construction of the desired object. Boat constructionis amongst the oldest divisions of engineering and is concerned amidcreatingboats. When the Titanic ship sank for example, then various researches started to be done (Bagnoli, 2015). One of the researches claimed the materialised in its construction to be a reason for its sinking. According to the research,it was observed that the wrought iron deployed in making the ship wasnt good enough (Stettler Thomas, 2013). The iron hulls that were preferred in making the ship for the reason that it lasted to a large extent longer as compared to the timber ship, possibly would hold supplementary freight, as well as was not effortlessly smashed by moorland mishap and crashes, and their fewer massive constituent parts supposed that it may lug overweight cargoes. The potency of iron aimed that generously proportioned additional open cargo seize possibly would be build, leading to superior speediness. But it suffered certain drawbacks as well, like easily rotten and heavy in. So, with the advancement in technology newer concepts were employed and hence iron was replaced by aluminum which provided the requisite strength,and on the other hand was very lighter that helped in lower fuel consumption and more load carrying capacity (Tjahjanti, Manfaat, Panunggal, Darminto, Nugroho, 2013). The hull of the Titanic also was seen to possess rivets some of which were made of mild steels and iron (Stettler Thomas, 2013). Arivetessentially is an enduring perfunctoryclosure. They were triple riveted and double riveted in the Titanic so as to assure the maximum strength in areas where a maximum amount of flex stresses were thought to be present. Though the steel rivets offered good strength, their counterparts made of wrought iron offered lesser strength. These wrought iron rivets became one of the causes of the sinking of the ship. Nowadays, thanks to the spectacular technological advances the use of wrought iron rivets has almost taken a back seat. The rivets are being made, using steel so that utmost strength and lightness can be provided to the ship. Steel, has a reliable amount of carbon right the way through. It is as well a bugdefiant, and furthermore; it shall never rot. These enduring properties of steel make it favorite in making rivets for the ship construction. It has been an important part of our life and will carry on for the future years. Essay D Aluminium metal is deficient in the strength in its pure form. To recover this deficiency and maintain its minimal density as well as less weight, some elements are included into it to pin displacements dropping the ductility but increasing its strength. Pure metal is blended with the other metals to produce alloys with excessive strength. General additives which are used to enhance the strength as well as the formability of metal aluminium consists of magnesium, copper, and silicon as well. Alloys of aluminium and zinc are the strongest ones present nowadays. Moreover, these are generally utilized by various industries such as aerospace industries. Due to this process, few alloys of aluminium can be solid as steel. Including copper in aluminum will increase its strength as well as hardness too and turn it heat curable. Secondly, including magnesium increases the tensile potency and gives resistance to corrosion. All this is done with the aluminum's structure having dislocations that turn it ductile as well as malleable. When strength is operated on metal, the dislocations may shift with particular slip panes, leading to deform the metal(Xiong, Zhuang, Zhang, 2015). When these dislocations are prohibited from shifting in this method, there is a great rise in its strength. Next method is precipitation hardening, which is also known as age hardening, is a technique of heat treatment. This method is used to raise the yielding strength of the metals, which are flexible such as aluminium. In super alloys, it affects anomaly of yield strength offering excessive temperature strength. This method relies on variations in fixed solubility as well as temperature to turn out minute substances of a contamination phase that obstructs the change in dislocation. As dislocations are habitually the leading transporters of plasticity, so this hands out to strengthen the material and make it hard. Same as the development of ice in the air or atmosphere may turn out particles with discrete sizes(Routledge, 2012). Contrast to normal tempering; these alloys should be maintained at raised temperature for some time to let precipitation occur and delay here is known as aging. Two distinct treatments of heat including precipitates can change the potency of the substance: soluti on heat-treatment and another one is the precipitation heat-treatment. Strengthening of the solid solution includes the creation of a particular phase hard solution through quenching. This precipitation heat treatment includes the insertion of impure substances to raise the strength of the material. Few alloys can be strengthened by heat-treating and then hasty cooling. This procedure immobilizes the atoms in the same place which makes the final metal stronger. On the other hand, a few aluminium metal is sometimes cold worked- frequently by rolling it, then stretching forming, for strengthening it more. It impedes the motion of atoms comparative to each one which strengthens the end product. The toughest aluminium alloys can achieve strengths as high as 72,000 pounds for each square inch. An aluminium wire of 1.2 inch prepared from this method could swing the entirely-encumbered tractor in the space. References Alario, M. Freudenburg, W. (2010). Environmental Risks and Environmental Justice, Or How Titanic Risks Are Not So Titanic After All*. Sociological Inquiry, 80(3), 500-512. Burkhart, F. (2012). Titanic: the optics of undersea discovery. SPIE Newsroom. Capuzzi, S., Timelli, G., Capra, L., Romano, L. (2016). Influence of Salt Quantity on Recovery Yield of Heterogeneous Aluminium Scrap. AMR, 1139, 16-19. Coyles, D. (2013). Reflections on Titanic Quarter: the cultural and material legacy of an historic Belfast brand. The Journal Of Architecture, 18(3), 331-363. Fedorowicz, Z. (2010). NHS Titanic?. JRSM, 103(11), 432-432. FENG, P. (2013). Symmetry Groups of Mechanical Parts and Its Application in Design for Assembly. Journal Of Mechanical Engineering, 49(11), 98. Han, Z., Liu, M., Gao, Y. (2014). Mechanical Properties of Stone Masonry Mechanical Properties. AMM, 507, 277-280 Hochrainer, S. Pflug, G. (2009). Natural Disaster Risk Bearing Ability of Governments: Consequences of kinked utility. Journal Of Natural Disaster Science, 31(1), 11-21. King, J., Ajao, A., Lichenstein, R., Magder, L. (2014). Surge in Hospitalizations Associated With Mechanical Ventilator Use During Influenza Outbreaks. Disaster Medicine And Public Health Preparedness, 8(02), 136-142 Kobayashi, T. Toda, H. (2007). Strength and Fracture of Aluminium Alloys. Materials Science Forum, 539-543, 127-134. Liou, N., Chen, S., Lu, M. (2010). The Mechanical Properties of Caladium Petiole. Strain, 47, 333-340. Noji, E. (2000). The Public Health Consequences of Disasters. Prehospital And Disaster Medicine, 15(04), 21-31. Ratnayake, R. (2014). KBE development for criticality classification of mechanical equipment: A fuzzy expert system. International Journal Of Disaster Risk Reduction, 9, 84-98. ReBagnoli, F. (2015). Sinking with the Titanic.Europhysics News,46(2), 30-31. Routledge, P. (2012). Safe prescribing: a Titanic challenge. British Journal Of Clinical Pharmacology, 74(4), 676-684. Stettler, J. Thomas, B. (2013). Flooding and structural forensic analysis of the sinking of the RMS Titanic.Ships And Offshore Structures,8(3-4), 346-366. Stettler, J. Thomas, B. (2013). Flooding and structural forensic analysis of the sinking of the RMS Titanic.Ships And Offshore Structures,8(3-4), 346-366. Tjahjanti, P., Manfaat, D., Panunggal, E., Darminto, D., Nugroho, W. (2013). Numerical Modeling of Ship Composite-Based on Aluminum Casting as Alternative Materials for Ship Building.AMR,789, 143-150. Xiong, Y., Zhuang, W., Zhang, M. (2015). Effect of the thickness of cold sprayed aluminium alloy coating on the adhesive bond strength with an aluminium alloy substrate. Surface And Coatings Technology, 270, 259-265. Xu, J. (2010). Classification and Coding Method of Mechanical Parts for the Design Process of Mass Customization. Journal Of Mechanical Engineering, 46(11), 149.

How are act 1, scene 1 and act 3, scene 1 of Romeo and Juliet made exciting for the audience Essay Example For Students

How are act 1, scene 1 and act 3, scene 1 of Romeo and Juliet made exciting for the audience ? Essay Romeo and Juliet is one of Shakespeares most famous plays. He starts the drama with an epic prologue. Shakespeare knew what appealed to the people in the theatre. They liked jokes about: sex, female and male relationships, racy jokes and puns. Shakespeare has tangled all of these and more into a magnificent piece of dramatic art. One of the ways Shakespeare makes this scene dramatically effective is the way he uses fighting and conflict for example Do you bite your thumb at me sir? I do bite my thumb, Sir This quote sparks off the main fighting between the Capulets and the Montagues. This quote plays a big part in the play because its shocking. It shocks the audience and offends the character. Because its a common swear word in a non common environment. Therefore making it offensive and making an action packed start to the play. Shakespeare turns the smallest fight into a big brawl. By the end of this scene the whole of Verona is in on the fighting for example Clubs, bills and partisans ! Strike, beat them down. Down with Montagues ! Down with Capulets ! This quote shows that the villagers are neutral This means they cant decide who to support. For example, they may feel that if they support the Montagues and the Montagues lose then they will become weak. This may also let the Capulets have the upper hand , therefore giving them more power and therefore causing more and more conflict. We will write a custom essay on How are act 1, scene 1 and act 3, scene 1 of Romeo and Juliet made exciting for the audience ? specifically for you for only $16.38 $13.9/page Order now Shakespeare has chosen a wide range of characters which entertain the audience. They go from fiery and aggressive to cool and collected. For example, Tybalts entrance is very melodramatic, the audience find out what his character is like by the way he acts and the drama he uses in his first lines What are thou drawn among these heartless hinds? Turn thee Benvolio. Look upon thy death This portrays Tybalt as a heartless monster and an evil villain. What, drawn and talk of peace ? I hate the word. As I hate hell, all Montagues. This quote shows how vindictive Tybalt is. He is as fiery as a dragon from the depths of hell. Benvolio however is a whole different person Benvolio is cool, calm, collected and tries to avoid conflict and trouble. Benvolio has more respect for his cousin than Tybalt has for his. As the drama rises in this opening scene, Benvolio tries to put a stop to it I do but keep the peace. Put up thy sword, or manage it to part these men with me. This shows that Benvolio wants everyone to calm down and stop. This shows Benvolio doesnt want to cause trouble and therefore not anger the prince. The drama the prince creates is through the way he shows himself when telling off the boys. Rebellious subjects enemies to peace, profaners of this neighbour stained steel will they not hear ? .etc. This shows that the Prince is the boss and that if anyone messes with him or with his town they will pay. This is shown later on in the speech when he says Have thrice disturbed the quiet of our streets This then shows that the boys are in more trouble than they had thought this is shown again later on in the speech when he says If ever you disturb our streets again, your lives shall pay the forfeit of the peace. This now shows there will definitely be more trouble. Therefore intriguing the audience. .u68f9a41be835006187c27a1844ce1b1d , .u68f9a41be835006187c27a1844ce1b1d .postImageUrl , .u68f9a41be835006187c27a1844ce1b1d .centered-text-area { min-height: 80px; position: relative; } .u68f9a41be835006187c27a1844ce1b1d , .u68f9a41be835006187c27a1844ce1b1d:hover , .u68f9a41be835006187c27a1844ce1b1d:visited , .u68f9a41be835006187c27a1844ce1b1d:active { border:0!important; } .u68f9a41be835006187c27a1844ce1b1d .clearfix:after { content: ""; display: table; clear: both; } .u68f9a41be835006187c27a1844ce1b1d { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .u68f9a41be835006187c27a1844ce1b1d:active , .u68f9a41be835006187c27a1844ce1b1d:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .u68f9a41be835006187c27a1844ce1b1d .centered-text-area { width: 100%; position: relative ; } .u68f9a41be835006187c27a1844ce1b1d .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .u68f9a41be835006187c27a1844ce1b1d .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .u68f9a41be835006187c27a1844ce1b1d .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .u68f9a41be835006187c27a1844ce1b1d:hover .ctaButton { background-color: #34495E!important; } .u68f9a41be835006187c27a1844ce1b1d .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .u68f9a41be835006187c27a1844ce1b1d .u68f9a41be835006187c27a1844ce1b1d-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .u68f9a41be835006187c27a1844ce1b1d:after { content: ""; display: block; clear: both; } READ: Hound of baskervilles EssayAct 3, scene 1 One of the ways Shakespeare makes this scene dramatically effective is the way he uses intermit, verbal, abusive content and the way all of a sudden an explosion of fighting, fear and tragedy breaks out. This attracts the audience to sit on the edge of their seats and gawp. This is shown when Mercutio starts to wind up Tybalt O calm, dishonourable vile submission! Alla stoccata carries it away. Tybalt, you rat catcher, will you walk? This gives us the impression that Mercutio is reeling Tybalt in. It sounds like he is prodding Him with a stick. Therefore Tybalt fights back as we see when Mercutio is killed. This shows Tybalt as a fox sly, cunning and quick. In this part of the play Romeo is shown as a soppy puppy. So love sick he cant see straight. Therefore he doesnt realise what is happening between Mercutio and Tybalt, until its to late then he turns to a violent murderer. This shows us that he has completely forgotten about Juliet. And fire-eyed fury be my conduct now. Now Tybalt take the Villain back again That late thou gavest me, for Mercutios soul This quote shows us that Tybalt hasnt got a chance and that Romeo is so angry that he will do anything to kill Tybalt. Romeos temperament has changed dramatically throughout the play. Therefore making it quite significant. It all starts off when he is besotted with his Rosalyn and then suddenly it all changes BANG hes in love with a girl he has never met before and wants to marry her as soon as possible. Then again it changes again BANG he is so mad at Tybalt for killing his best friend he couldnt care less about Juliet ! This all shows us that he is a bit of a Drama queen and has the temper of a rottweiler !! Conclusion In conclusion I feel that these two scenes give a good contrast of romance, conflict, pain and suffering ! In my opinion I feel that Shakespeare has really shown two aspects of society, for example: Rich Vs Poor and Black Vs white and even Ego Vs Ego !!!! Shakespeare has shown that conflict is all around and that especially back then, society was a big thing. Therefore I feel that Romeo and Juliet makes a great epic to compare modern day life with now !!!!!